If you want to make your dog steps using recycled materials, here’s what you’ll need to do. First, gather some old cardboard boxes of the same size. You’ll also need duct tape, a sharp knife, and patience.
Once you have all your materials, follow these simple instructions, and you’ll have homemade dog steps in no time.
DIY PET STAIRS UNDER $1 #recycled material ♻
- Gather your recycled materials
- You will need two milk crates, four 2x4s, a piece of plywood, and some old carpeting.
- Cut the 2x4s to fit the height of your milk crates
- You will need two pieces for each side of the crate
- Screw the 2x4s into the milk crates using screws or nails
- Cut the plywood to fit on top of the 2x4s
- This will be your dog’s stepping surface
- Nail or screw the plywood onto the 2x4s
- Cover the plywood with old carpeting, stapling it in place if necessary
How to Make Stairs Out of Cardboard/ Easy
Making stairs out of cardboard is a simple and easy process that anyone can do. All you need is some cardboard, tape, and scissors.
Here’s how to make Stairs with Cardboard
- Cut your cardboard into rectangular strips, ensuring they are all the same width. The length will depend on how tall you want your stairs to be.
- Tape the strips together end-to-end, forming a long rectangle.
- Fold the rectangle in half lengthwise, then fold it in half again (so it’s now a quarter of its original size).
- Cut slits along the folded edge at regular intervals; these will be the steps of your staircase. Make sure the slits are wide enough for someone to step on them comfortably.
How to Make Dog Stairs Out of Boxes
If you have a small dog, chances are you’ve considered making some dog stairs to help them get around. Dog stairs can be expensive to purchase, but if you have some extra boxes lying around, you can make your own! Here’s how:
- Gather your materials. You will need four medium-sized cardboard boxes, tape, and scissors.
- Cut two of the boxes in half lengthwise. These will be the sides of your stairs.
- Tape the halves together so that they form a rectangle. Repeat with the other two boxes.
- Stack the rectangles on top of each other, taping them together as you go. Make sure that the steps are evenly spaced and that there is plenty of room for your dog to walk up and down them comfortably.
- Your dog stairs are now ready to use! Place them next to whatever your dog needs to get on or off of, and let them give it a try!
How to Make Dog Stairs Out of Pallets
If you have an extra pallet or two lying around, put them to good use by making a set of dog stairs. This is a great project for beginning woodworkers as it’s relatively simple and doesn’t require many tools. Plus, your pup will love having their own set of stairs to help them get up on the bed or couch.
Here’s how to make dog stairs out of pallets:
- Start by disassembling the pallets. You’ll need four boards for each step, so plan accordingly. Use a hammer or pry bar to remove the nails or staples holding the boards together.
- Cut the boards to size. For each step, you’ll need two boards 18 inches wide and two 24 inches wide. Cut each board to length using a saw – you’ll need two 18-inch and 24-inch boards for each step.
- Assemble the steps using screws and glue. Drill pilot holes in each board before screwing them together with 3-inch deck screws. Apply wood glue to all joints before assembly for extra strength. Let the glue dry completely before moving on to the next step.
- Attach climbing carpet or grip tape to the treads. This will provide traction for your dog’s paws and prevent slipping. Use heavy-duty double-sided tape or carpet tacks to secure the material in place.
- Trim any excess with a utility knife.
How to Build Dog Steps for High Beds
You may need to help your furry friend get up and down if you have a high bed and a small dog. Building dog steps for high beds is a relatively easy project that can be completed over a weekend.
Build Dog Steps for High Beds:
- Measure the height of your bed and cut four pieces of wood to size (two for the sides and two for the front and back). Add a few inches to each piece so the steps will be sturdy.
- Assemble the frame of the steps using screws or nails.
- Cut out three treads from plywood or another sturdy material. The treads should be slightly shorter than the distance between the side rails to fit snugly.
- Attach the treads to the frame using screws or nails, spacing them evenly apart.
- Cover any exposed screw heads with rubber tips or caps. These can be found at most hardware stores.
- Place the finished steps next to your bed so your dog can use them to get up and down safely!
Free Plans for Dog Steps
There are a lot of different ways that you can go about finding free plans for dog steps. If you have some basic carpentry skills, you may be able to find some simple techniques online or in magazines. You can also check with your local hardware store or pet store to see if they have any recommendations.
If you’re not particularly handy, you may want to consider purchasing pre-made dog steps. Several companies sell these, and they come in various sizes and styles to suit any need. Prices will vary depending on the quality and features, but you should be able to find something within your budget.
No matter your route, ensure that your dog’s steps are sturdy and safe. They should be easy for your dog to use and provide a stable surface for them to climb on and off. With a little bit of research, you should be able to find the perfect set of dog steps for your home.
Credit: www.itsoverflowing.com
How Do You Make Dog Steps at Home?
Assuming you would like a tutorial on how to make dog steps:
You will need:
- One piece of plywood (we used an old article that we had laying around)
- Four 2x4s (these will be your support beams, so make sure they’re long enough for your needs) -Tape measure -Pencil or pen
- Circular saw or hand saw (if using a hand saw, get someone to help you cut the plywood)
- drill with screw bits (to attach the 2x4s and to the plywood)
- sandpaper (80 grit or higher)
Optional: paint or sealant (to make them look nicer and last longer)
Instructions:
- Measure and mark out your cuts on the plywood. You’ll need two pieces that are 29″x16″ and two pieces that are 13.5″x16″. Cut these out with your saw.
- Next, take your four 2x4s and measure out cuts that are 28″ long and 13″ long. These will be your support beams, so make sure they’re cut to size before moving on.
- Once your pieces are cut, it’s time to start assembling! Take two of the 28″ beams and attach them using screws and drill bit attachments made for wood. Repeat this step with the remaining two 28″ beams so that you have two sets of beams attached at 28″. Now do the same thing with the 13″ beams so that you have two sets of those attached as well.
- To finish attaching the supports, take one set of each beam length and connect them at 16″, making a big rectangle shape out of all four beams. This is what will support your stairs/steps when completed. Make sure everything is securely fastened together before continuing to the next step.
- Now it’s time to add in the stair treads! Take one 29″x16″ piece of plywood and screw it into place onto two adjacent sides of the frame you just created using screws placed every few inches along both edges. Do this for each side until all four treads are in place. If everything looks level, congratulations!
How Do You Make Dog Steps Out of Cardboard?
If you’re looking for an easy and fun project with your kids (or on your own), why not make some dog steps out of cardboard? It’s a great way to upcycle those old cardboard boxes, and your dog will love having their own set of steps to help them get around.
Here’s what you’ll need:
- Cardboard box(es)
- Tape
- Scissors
- Pen or pencil
- Ruler or measuring tape
First, cut the top and bottom off your cardboard box (you can save these pieces for another project).
Then, cut the remaining portion of cardboard in half lengthwise.
You should now have two long rectangles of cardboard. Next, use your ruler or measuring tape to mark where you will cut the slits for the steps. Each step should be about 6-8 inches wide, and you’ll want to space them out evenly along the length of the cardboard.
Use a pen or pencil to mark where you’ll be making each cut. Now it’s time to start cutting! Carefully cut along the lines you drew earlier, careful not to make the slits too big or too small.
Once your slits are cut, it’s time to start assembly. Tape each step securely on one side of the long rectangle of cardboard. Once all steps are in place on one side, flip the piece over and tape them on the other side.
This will help ensure that your steps are sturdy and won’t collapse when your dog uses them. And that’s it! Your dog’s steps are now complete.
How Do You Make a Pet Step?
If you have a pet that is too small to jump onto your bed or couch, you may want to consider making them a pet step. Pet steps are relatively easy and inexpensive to make, and they can provide your furry friend with the extra boost they need to get up to their favorite spot. Here’s how you can make a pet step:
- Decide on the size of the step. This will depend on the size of your pet and the height of the furniture they need to be able to reach. A good rule is that each step should be about 6 inches tall.
- Cut two pieces of plywood or MDF (medium-density fiberboard) to this size using a saw. These will be the sides of the steps.
- Make sure that the edges of these pieces are smooth so that your pet doesn’t hurt themselves when climbing up the steps. You can use sandpaper to achieve this goal if necessary.
- Attach these side panels using L-brackets, screws, or nails depending on what you have available/what is most appropriate for the material you’re using.
- Add some grip to the top surface of each step by attaching carpeting, felt pads, or non-slip shelf liner with adhesive tape.
- Place your finished steps next to whatever piece of furniture your pet needs help getting onto, and voila!
What Can I Use As Dog Stairs?
Depending on your needs and budget, you can use a few dog stairs. A simple option is to use a couple of boxes or crates of the same size, placed side by side. You can also buy pet steps or ramps designed for dogs, which fold up for easy storage.
If your dog has trouble climbing stairs, talk to your veterinarian about possible health issues causing this problem.
Conclusion
If you have some old recycled materials lying around the house, why not put them to good use and make a set of dog steps? This is a great project for anyone who loves DIY and wants to save money. Plus, your dog will appreciate having their own set of stairs to get up on the bed or couch.
Here’s what you’ll need: -Some old cardboard boxes or recycled wood (enough to make four steps) -A sharp knife or box cutter
-A stapler or hot glue gun -Some fabric or carpet (optional) First, cut your cardboard or wood into four equal pieces.
Using cardboard, you may want to reinforce the sides with duct tape or another strong adhesive. Next, staple or glue the pieces together to form a stair shape. If desired, cover the steps with fabric or carpet to make them more comfortable for your pup.
That’s it! You now have a sturdy, eco-friendly set of dog steps that should last for years.
GIPHY App Key not set. Please check settings