Designer dog carrier purses are all the rage these days, but they can be quite expensive. If you’re a DIY person, you can easily make your dog carrier purse for a fraction of the cost. All you need is a little fabric, some basic sewing supplies, and about an hour or two of your time.
Here’s what you need to do to start:
- Choose your fabric. You’ll want something sturdy like canvas or denim, but it must also be soft, so your pup is comfortable inside. Consider using a fun pattern or print for added personality.
- Cut out two rectangular pieces of fabric that are identical in size. These will form the sides and bottom of the purse.
- Sew the two pieces along three sides, leaving one end open. This will be the opening of the purse where your dog can enter and exit as needed.
- Pick out a purse that you think would be suitable for your dog
- It should be large enough for them to fit inside and have some ventilation comfortably, so they don’t get too hot
- Cut a hole in the side of the purse, big enough for your dog to fit through
- Line the inside of the purse with a soft towel or blanket
- Put your dog in the carrier and give them some treats to keep them calm and occupied
- Close the carrier and ensure all the straps are secure before heading out with your furry friend!
Credit: www.youtube.com
How Do You Make a Pet Carrier Bag?
Assuming you would like instructions on how to make a pet carrier bag: You will need: -1/2 yard of heavyweight canvas or denim
-1/4 yard of medium-weight fabric for lining -1/2 yard of fusible interfacing -Coordinating thread
-A sewing machine -Scissors -Pins
-An iron and ironing board Instructions:
- Cut all your pieces out first. For the bag’s exterior, you’ll need two 18″x13″ rectangles from the heavyweight canvas or denim. You’ll also need two 18″x13″ rectangles from the lining fabric. And finally, you’ll need one 18″x13″ rectangle from the fusible interfacing.
- Fuse the interfacing to one of the exterior fabric rectangles according to the package directions. This will give your bag some structure and body.
- With the right sides together, sew along both 13″ sides of both fabric rectangles using a 1/2″ seam allowance. Do not sew along the 18″ side – this will be your opening.
- Press your seams with an iron and then topstitch 1/8″ from each seam to reinforce them (this step is optional but recommended).
- Create box corners on both sides by folding each corner so that the side and bottom seams line up and form a 90-degree angle; pin in place. Sew across each corner at a 1/2″ seam allowance, making sure to backstitch at the beginning and end for reinforcement; trim off excess fabric close to stitches (as shown in the photo). Repeat for another side as well! Now you should have two bags with boxed corners – one lined and one unlined (the fused interfacing piece will be considered your “unlined”).
How Do You Make a Homemade Dog Carrier Sling?
A dog carrier sling is a great way to keep your furry friend close while freeing up your hands. Here’s how to make your own:
- Cut a rectangle of fabric twice your dog’s width and long enough to go from its chest to behind its hind legs. Fold the fabric in half lengthwise.
- Sew the long sides of the rectangle together, leaving a few inches open at each end. Turn the sling right side out.
- Place your dog inside the sling and position it so that its chest is in the center of the fabric and its back legs hang out of one end. Bring up the other end of the fabric and tie it around the waist, securing it with a knot or bow.
How Do You Make a Homemade Pet Carrier?
Assuming you would like tips on creating a comfortable carrier for your pet using household items: One option is to use an old duffel bag or backpack. Line the bottom with a soft towel or blanket and add toys and treats.
If your pet is small enough, you can also line the inside of the bag with a pillowcase for extra comfort. Make sure the bag is big enough for your pet to move around in but not so big that it can get stuck. Another option is to create a makeshift carrier out of cardboard boxes.
Again, line the bottom with a soft towel or blanket and add some toys and treats. You can even cut a window on one side of the box so your pet can see what’s happening outside. Ensure the box is large enough for your pet to move around and that any openings are covered so they can’t escape.
How Do You Make a Dog Walk Sling?
Assuming you would like instructions on how to make a dog walking sling: You will need: -1/2 yard of cotton or canvas fabric (or an old t-shirt)
-Scissors -Thread and needle or sewing machine -1 inch wide ribbon, about 2 feet long
-Lighter (optional) Instructions:
- Cut a rectangular fabric 24 inches wide and 36 inches long. If you wear an old t-shirt, cut off the sleeves and neckline. Fold the fabric half lengthwise, now 18 inches wide and 36 inches long. Sew along the 18-inch edge with a ½ inch seam allowance, using either a thread and needle or a sewing machine. Using a sewing machine, use a zigzag stitch to reinforce the seam.
- Find the center of the sling by folding it in half again widthwise. Make sure the side with the seam faces down, then mark this spot with a pin or chalk. At the center point, measure 4 inches from each side and mark these spots. This will be where you attach the ribbon later on.
- Cut two lengths of ribbon that are each 1 foot long. Using a lighter, carefully sing each ribbon’s ends to prevent fraying. Fold each ribbon in half and tie a knot at the end to form a loop. These will later attach the sling to your dog’s harness.
- Now, it’s time to finish up the edges of your sling! On both sides (the short ends), fold over ¼ inch of fabric and press down with an iron. Then fold over another ½ inch and press down again. Sew along this folded edge, close to but not touching the raw edge of the fabric.
Diy Dog and Cat sling/dog carrier / simple and easy to make
Dog Carrier Bag
As a pet owner, you want to ensure your dog is comfortable and safe when traveling. A dog carrier bag can help make this happen. Here are some things to consider when choosing a carrier bag for your dog:
Size – You’ll want to ensure the carrier bag is big enough for your dog to move around comfortably. But you also don’t want it to be too big that your dog feels like they’re swimming in it. Ventilation – Ensure the carrier has good ventilation, so your dog doesn’t overheat inside.
Padding – Choose a carrier with soft, padded sides so your dog will be comfortable during long trips. Zipper Closures – Look for a carrier with zipper closures that will keep your dog securely inside. And, if possible, find one with locking zippers for extra security.
Diy Dog Carrier Backpack
Whether you’re an experienced dog owner or a first-time pet parent, there are plenty of reasons to consider investing in a dog carrier backpack. They make it easier to transport your furry friend from one place to another, and they can also help reduce stress on your back and shoulders. And if you love spending time outdoors with your pup, a carrier backpack is the perfect way to bring them along for the adventure.
There are a few things to remember when shopping for a carrier backpack, such as size, comfort, and durability. You’ll also want to ensure that your chosen carrier is safe for your dog and meets all safety standards. To help get you started on your search, we’ve rounded up the best dog carrier backpacks on the market.
Small Dog Carrier Bag
A dog carrier bag is a necessity for small dog owners. It allows you to bring your furry friend on the go without worrying about them getting lost or hurt. Various types and styles of carrier bags are available, so finding the perfect one for your pup shouldn’t be too difficult.
When choosing a carrier bag, it’s essential to consider your dog’s size and personality. If your pup is on the smaller side, plenty of carriers are designed specifically for them. These usually have extra padding and support to keep your little one comfortable during travel.
For dogs who tend to get anxious in new situations, look for a carrier that offers ample ventilation and has some type of cover or top that can be put over the opening. This will help your dog feel more secure while still being able to see what’s going on around them. Once you’ve found the right bag, make sure to get some practice using it before hitting the road with your pup.
Place your dog inside and let them explore its new space while you stay close by. Get them used to being in the carrier, so they don’t get stressed out when it comes time to use it. With some preparation, you and your furry friend will be ready for anything!
Dog Carrier Pdf Pattern
A dog carrier is a great way to transport your furry friend with you on the go. But buying one can be expensive, so why not make your own? This free PDF pattern will show you how to sew a stylish and functional carrier.
The carrier features two openings – one on the top for your pup to peek out of and one on the side for easy access. There’s also a built-in leash attachment to keep your dog safe while inside. Plus, the entire thing is lined with soft fabric to keep them cozy during their ride.
This project is perfect for beginner sewers. Just download the pattern, print it out, and follow the instructions. In no time, you’ll have a custom carrier that’s sure to make tails wag!
Conclusion
This blog post discusses how to make a dog carrier purse. The author provides detailed instructions on how to measure and cut the fabric, as well as how to sew the purse. She also includes several photos of the process.
This project is perfect for anyone who loves their dog and wants to take them with them everywhere they go!
GIPHY App Key not set. Please check settings